Izdelki za jeklena jekla (144)

For the last 60 years, AMETEK Specialty Metal Products has built a strong reputation for supplying major companies within the space industry with high performance materials. Our high quality, lightweight and innovative products deliver outstanding durability and corrosion resistance for space launch vehicles and satellites. Advanced Materials for Space Applications We specialize in engineering precision metal strip and metal composites using the highest quality and purity materials. Our products are used to improve performance in critical space applications, including: Molybdenum-Copper composites for heat management in electronic packages that operate in spacecraft and satellites. High purity Nickel strip for battery connectors in weight sensitive space applications, that deliver 15 - 20% higher conductivity than traditional cast nickel strip.

HPM® 80/20 A is a resistance alloy used in electric heating applications. It is recommended for use in dry air applications up to 2150°F with good hot strength. Such as, flexible metal foil heaters and airbag igniters. The alloy forms rather well and has good welding characteristic. Caution should be used to avoid extended exposure to elevated temperature in marginally oxidizing or partially reducing atmospheres as it would be susceptible to “green rot” corrosion, carburization and sulfurization. Available Sizes: HPM® 80/20 A is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) and width up to 12” (304.8 mm). The material conforms to ASTM B-344. Foil product may be supplied in thickness to 0.0001” (0.00254 mm) in width up to 4.0” (101.6 mm). Density:0.304 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:108 Microhm·cm Temperature Coefficient of Resistivity (TCR) (25°C to 105°C):100 ppm/°C Thermal Expansion Coefficient (20° to 100°C):13.4 x 10-6/°C Thermal Conductivity @ 100°C:13.4 W/m·K Magnetic Attraction:None

17-4 PH®, a wrought compressed stainless steel powder, combines high strength and high hardness with excellent corrosion resistance, fracture toughness and heat treatment properties. When machined, 17-4 PH® produces long, gummy chips. While soft and ductile in an annealed condition, it is capable of high hardness properties with a single precipitation or aging treatment. Applications 17-4 PH® is ideal for manufacturing aircraft fittings, braces, chemical processing components, coupling, fasteners, gas turbines, gears, hydraulic actuators, jet engines, nuclear reactor parts, pump shafts, rocket and missile components, valve stems and wear rings. The physical properties of 17-4 PH® stainless steel make it weldable by common fusion and resistance techniques. Among members of the precipitation hardening class of stainless steels, 17-4 PH® has the best weldability.

Superior Tube has a long history of supplying high quality metal tubing to the nuclear power industry going right back to its inception after World War II. It’s an area where strict compliance and integrity are absolutely critical. We have a track record of developing new solutions and helping the nuclear energy sector to advance. Our tubes are deployed in the cores of nuclear reactors, where they must endure in an extremely demanding environment for the entire life cycle of each reactor. Control rod and cladding tubing are critical safety components, as they are responsible for controlling the nuclear reaction and energy output within the core. Superior currently produces control rod tubing from 1.0” in outside diameter down to around .250” OD. If you have demand of products within or outside of this range, please contact us so we can provide a solution. Please note that we have a minimum order value of £10,000.

Superior Tube supplies a whole range of products to the oil and gas sector, and it’s one of our most important markets. You’ll find our high performance tubes successfully used in some of the most aggressive subsea and downhole conditions thanks to our proven track record in meeting the strict quality requirements of the oil, gas and geothermal energy industries. Improving technology has extended the range of ways in which oil and gas fields can be exploited, and increasingly projects require the use of long, continuous lengths of stainless steel control lines. These are employed in a variety of applications including hydraulic controls, instrumentation, chemical injection, umbilicals and flowline control. Fine Tubes supplies products for all of these applications, and more, lowering operating costs and improved recovery methods for our customers. Please note that we have a minimum order value of £10,000.

Our ability to strategically blend alloys allows us to offer specifically blended materials such as highly alloyed Nickel-Tungsten strip (NiW) for superconducting substrates. These custom alloys are available at customer-specified chemistries and cold work. The use of Tungsten in these alloys produces a flexible strip with preferred magnetic characteristics for superconducting wire. High Temperature Superconductors Our Nickel Tungsten substrate material is used in high temperature superconductors (HTS) to carry high-density electrical currents with very little energy dissipation. This property makes high temperature superconducting wire suitable for sectors such as power generation and transmission, electric motors, and high magnetic field generation. Nickel and nickel alloys are used as substrate materials because they are flexible to the thermomechanical processing of the wire making process.

Shunt Manganin is a Copper-Manganese resistance alloy used for shunts in various high current applications. The alloy has a low temperature coefficient of resistivity with peak resistance at about 50°C. The thermal EMF vs. Copper is very low. The alloy can be easily formed from the annealed temper.The maximum recommended operating temperature in air is 200°F. Available Sizes: Shunt Manganin is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005 to 0.053” (0.0127 mm to 1.346 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000100” (0.00254 mm) in widths of 4.0” (101.6 mm) maximum. Density:0.296 lb/in³ Melting Point (Approx.):985°C Electrical Resistivity @ R.T.:38.1 Microhm·cm Temperature Coefficient of Resistivity (40° to 60°C):±15 PPM/°C Electrical Conductivity @ R.T:19.8 W/m·K Magnetic Attraction:None

Alloy 22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy 22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi-purpose plants where such “upset” conditions occur frequently. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):414 J/kg/°K Thermal conductivity:10.2 W/m/°K Thermal Expansion:6.9 μm/μm/°C Modulus Elasticity:206 Gpa Electrical Resistivity:4.48 μohm/cm Density:8.69 g/cm3

At Superior Tube we're proud of the way our precision tubes are used to help save lives. Welded and seamless tubes we've manufactured are used for specialized products across the medical device industry. For instance, transcatheter aortic valve replacement (TAVR) is a promising new treatment for patients with severe aortic stenosis - a narrowing of the heart valve - who are not ideal candidates for traditional open-heart surgery. Because the replacement valve can be implanted using techniques that are far less intrusive than open-heart surgery, patients with TAVR usually experience a much more rapid recovery than they normally would. On the other hand, more traditional valve replacement surgery might employ our pericardial stented tissue heart valves. These implants help blood flow naturally and offer excellent hemodynamic performance. They are designed for optimal performance and long-term durability. Please note that we have a minimum order value of £10,000.

Alloy 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000°F (1093°C). The high nickel content of the alloy enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Its chromium content gives the alloy resistance to sulphur compounds and various oxidizing environments. In strong oxidizing solutions like hot, concentrated nitric acid Alloy 600 has poor resistance. Alloy 600 is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):460 J/kg/°K Thermal conductivity:14.8 W/m/°K Thermal Expansion:12.4 μm/μm/°C Modulus Elasticity:207 Gpa Electrical Resistivity:10.3 μohm/cm Density:8.42 g/cm3

Our roll bonded clad plate is ideally suited for structural transition joints. The ability to roll bond dissimilar metals such as stainless steel and aluminum products are ideally suited for in the shipbuilding industry allowing for a weld free transition between stainless steel and aluminum. As a world class clad plate manufacturer, we specialize in producing custom roll bonded clad plate to customer exact specifications. Materials Typical transition plate material is Stainless Steel/Aluminum. However, other material can be considered. Specifications and Certifications Typical material requirements are provided per SA264 with shear and bend test 100% UT examined per SA578-Level B, hot rolled and cleaned. Other material requirements can be provided such as + HIC requirements, Simulated PWHT coupons, and Charpy Impact testing. Material can be supplied to meet ASME BPVC Sec II.

Fine Tubes has a long and proud heritage of manufacturing tubes that operate in hostile environments - where performance is everything and maintenance is impossible. High-Quality Tubes For The Solar Orbiter Our precision seamless titanium tubes were selected to operate in the Chemical Propulsion System for the Solar Orbiter mission. The highly engineered tubes exceeded the demands for quality and cleanliness specified for this mission-critical application. Please note that we have a minimum order value of £10,000.

AMETEK Specialty Metal Products has led the industry in the production of Pfinodal® (C72900), a highly specialized Spinodal alloy, with superior bearing properties. Our production processes and heat treatments combine to ensure the high hardness required in tough drill bit material for bearing components such as sleeves, bushings, washers and caps. Our Pfinodal® (C72900) bearing materials has been in use for 20 years under patent numbers 5527113 and 5552106 for these rock bit bearing applications. Advantages The near-net shape processing of our Spinodal materials eliminates waste thereby reducing cost for the finished product. We specialize in offering the turnkey solutions of materials that are machined, plated and packaged to your specifications. These can be shipped to your facilities around the world for incorporation in the bits, reamers and equipment needed to power the world.

HPM ® 270 Nickel is the highest purity Nickel. The controlled low impurity level provides uniform and repeatable mechanical, electrical, and magnetic properties. The material has excellent corrosion resistance with high thermal and electrical conductivities. A high thermal coefficient of electrical resistance makes it suitable for strain gauges, temperature sensors, and electronic components. The alloy can be formed by all conventional cold forming methods, and can be joined by resistance welding, brazing and soldering. The corrosion resistance is generally very good in most mediums, although, it is subject to intergranular embrittlement by sulfur compounds above 315°C Available Sizes: HPM ® 270 Nickel is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.020” (0.0127 mm to 0.508 mm) in widths up to 12.0” (304.8 mm). It is available as foil as thin Density:0.322 lbs./cu.in. Melting Point (Approx.):1450°C Electrical Resistivity @ R.T.:7.4 Microhm·cm Temperature Coefficient of Resistivity (TCR) (0°C to 25°C):6000 ppm/°C Thermal Expansion Coefficient (20°C to 100°C):14.0 X 10-6 /°C Thermal Conductivity @ R.T.:86.3 W/m·K Curie Temperature:355°C

Alloy 400 (UNS N04400) is a solid-solution Nickel/Copper alloy that can be hardened only by cold working. It has reasonable strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):427 J/kg/°K Thermal conductivity:21.8 W/m/°K Thermal Expansion:13.9 μm/μm/°C Modulus Elasticity:173 Gpa Electrical Resistivity:5.47 μohm/cm Density:8.83 g/cm3

Materials used in Mining and Drilling are subject to some of the harshest environmental conditions in the world. We’re committed to manufacturing durable, high strength and corrosion resistant Spinodal products for vital drilling and downhole components. Unrivaled Resistance to The Harshest Environments Our Spinodal alloys are highly specialized and possess excellent corrosion resistance. They benefit from age hardening techniques that further increase their strength and hardness while offering superior mechanical and physical properties for demanding applications including: Pfinodal® (C72900) Drill Bit Material for Bearing Components such as Sleeves, Bushings, Washers and Caps Pfinodal® (C72900) and AM-388™ (UNS C72650) Shaped Charge Liner Material for Wall Perforation Pfinodal ® (C72900) Bar and Tube for Downhole Housings, Centralizers, Joints

Our High Purity Iron is generally used as a header material for Hermetic Package applications. The material is characterized by the extremely low carbon content (below 100ppm). Additional applications are as a catalyst for synthetic diamond production.

precision metal strip products, Superior Titanium Strip, Implantable Medical Dev - Our precision metal strip products are custom-made in biocompatible alloys for implantable medical devices that improve quality of life for patients around the world. We work in partnership with Hamilton Precision Metals to manufacture innovative metal materials that enable smaller, lighter and higher performing medical implants. Superior Titanium Strip for Implantable Medical Devices We have developed proprietary practices for the successful reduction of Titanium Grade 5 (6Al-4V) and Titanium Grade 23 Alloys (6Al-4V ELI) to thicknesses of 0.0039” (0.10mm). Our process results in a finish much superior to alternative methods of etching or grinding strips to gauge. This surface finish and gauge control translates to improvements in finished product quality as well as process controls during drawing, stamping, etching or laser cutting. These alloys are offered in the fully annealed or the as-rolled tempers.

Our highly specialized Spinodal materials are custom-engineered for electronic connectors and deliver major advantages in comparison to traditional materials such as Beryllium Copper (BeCu). We offer precision strip and wire products in alloy Pfinodal® (UNS C72900), a copper nickel tin Spinodal alloy, for the manufacturing of high performance electronic connectors in the electronics industry. Safe Alternative to Beryllium Copper (BeCu) Beryllium Copper (BeCu) materials are the historical choice for electronic connectors. Our high performance Pfinodal® (UNS C72900) delivers similar mechanical properties to Beryllium Copper but without the harmful exposure risks.

We deliver precision tubes specially engineered for aerospace engines that perform in the most extreme pressures and temperatures. Trusted by Major Engine OEMs Our aerospace engine tubes are trusted by major OEMs to operate in a variety of critical aircraft engine systems including fuel delivery, fire suppression, thrust reverser, drain lines, and bleed air systems. Please note that we have a minimum order value of £10,000.

HPM® Ni 42 is a Nickel-Iron alloy with a thermal expansion coefficient suitable for matching to the ceramic chip in numerous miniature electronic circuits The alloy is readily formed from the annealed temper and can be welded or brazed by standard methods. The alloy is not corrosion resistant at 20°C when exposed to a moist or salt-containing atmosphere. Available Sizes: HPM® Ni 42 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM F30 and UNS K94100. Density:0.293 lbs/cu.in. Melting Point (Approx.):1440°C Electrical Resistivity @ R.T.:70 Microhm·cm Temperature Coefficient of Resistivity (20° to 100°C):2500 PPM/°C Thermal Expansion Coefficient (30° to 400°C):6.0 X 10-6/°C Thermal Conductvity @ R.T.:14.5 W/m·K Curie Temperature:375°C

HPM® C 276 is a Nickel-Molybdenum-Chromium-Tungsten alloy with a high level of corrosion resistance. A low carbon content enables the alloy to resist intergranular corrosion at weld joints. These attributes make it an important alloy for the most severe chemical processing applications. such as use in metal diaphragms for aerospace sensors and burst discs. The alloy is readily formed from the annealed temper.All standard welding methods except oxy-acetylene can be used for joining. Available Sizes: HPM® C 276 is available from Hamilton Precision Metals as strip product in thicknesses From 0.0005” to 0.050” (0.0127 mm to 1.27 mm) and widths up to 12.0” (304.8 mm). The material conforms to ASTM B575 and UNS N10276. Density:0.321 lbs./cu.in. Melting Point (Approx.):1325°C Electrical Resistivity @ R.T.:130 Microhm·cm Temperature Coefficient of Resistivity (20° to 95°C):11.2 x 10-6/ °C Thermal Conductivity @ R.T:10.2 W/m·K Magnetic Attraction:None

Our Pure Nickel Strip has been the premier material for battery connections for decades. The high purity of our custom-made material offers the highest conductivity of commercially manufactured nickel products due to the low impurity level. Battery Contacts for Implantable Medical Devices Patients worldwide rely on batteries to improve and maintain quality of life. Our pure nickel strip materials are used to power implantable devices such as neurostimulators, pacemakers, and cardiac defibrillators. Aerospace Battery Connectors Nickel strip engineered for high-tech aircraft battery systems that deliver long life and high reliability. Our materials are critical to safety, providing peak power for engine and emergency power backup. Rechargeable Battery Components in Drilling applications Nickel 201/270 strip for rechargeable battery components used in oilfield downhole tools, drilling, measurement

The chemically stable and high-temperature resistant nickel-chromium-molybdenum alloy 2.4605 (alloy 59) is mainly used in the chemical industry, flue gas desulphurisation plants, paper industry. Alloy 59 is a nickel-chromium-molybdenum alloy with excellent corrosion resistance and high mechanical strength. The alloy has excellent resistance to both oxidizing and reducing media, and possesses superior resistance to chloride pitting and stress corrosion cracking. The alloy is widely used in the most severe environments. Some applications include: flue gas scrubber components, bleach plant and digester components for the pulp and paper industry, sour gas handling equipment, sulfuric acid coolers, waste incinerators and seawater equipment. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):414 J/kg/°K Thermal conductivity:10.2 W/m/°K Thermal Expansion:21.3 μm/μm/°C Modulus Elasticity:210 Gpa Electrical Resistivity:1.26 μohm/cm Density:8.61 g/cm3

For more than 85 years, we have been at the forefront of supporting metallurgical and engineering advances in the medical industry. Today, our innovative materials are used by some of the largest manufacturers of implantable medical devices and technology in the world. Implantable Materials for Life-Saving Medical Applications Our precision strip and shaped wire materials are custom-engineered in biocompatible alloys and play a critical role in creating life-saving medical implants and medical devices. Precision Metal Strip for Implantable Medical Devices Tight Tolerance Custom Shaped Wire for Orthodontic Brackets Shaped Wire for Toothbrush Staples and Anchor Wire Electrolytic Copper Wire (C11000) used as Shaped Channel Wire for Superconductors in MRI Scanners We Engineer Precision Materials to Meet Your Medical Implant Needs Our range of highly customized medical-grade alloys combined with our metallurgical expertise, makes us the go-to material supplier

Cu-Ni 715 is a copper-nickel alloy that is resistant to corrosion in sea water. The alloy has good fatigue strength and relatively high thermal conductivity. This alloy is used mainly for flexible metal foil heaters. The alloy is readily formed in the annealed temper, and can be joined by the standard welding, brazing and soldering processes. Available Sizes: Cu-Ni 715 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.010” (0.0127 mm to 0.254 mm) in widths up to 12” (304.8 mm). The material conforms to ASTM B122 and UNS C71500. Density:0.322 lbs./cu.in. Melting Point (Approx.):1170°C Electrical Resistivity @ R.T.:41.2 Microhm·cm Thermal Expansion Coefficient (20° to 95°C):15.5 x 10-6/°C Electrical Conductivity @ R.T:29.4 W/m·K Magnetic Attraction:None

Samples from heat 305992 at 0.045” thick in strand annealed condition Evaluation showed strip to be HRB 91, ASTM grain size 6 Weld beads placed on annealed strip via EB welding at International Beam Welding Corp.

Major engineering companies who design and manufacture aerospace engines rely on the strength and durability of tubing products made at the Superior Tube mill. This is due to our reputation for producing high quality, high strength, yet lightweight tubing. You’ll find our tubes at work within a variety of systems in aircraft including fuel delivery, fire suppression, drain lines and bleed air systems. Bleed air is high temperature, high pressure air taken from the jet engine and fed into various areas of the plane to be used for things like de-icing and cabin pressurization. We use high performance materials such as Alloy 321 stainless steel and Inconel 625 and 718 for applications that deal with extreme temperatures. Precision tubing for aerospace engines can be ordered in sizes from 0.250” outside diameter right up to 1.5”. Please note that we have a minimum order value of £10,000.

Major players in both the aerospace and nuclear power industries rely on Superior Tube for precision tubing to protect their control systems and instrumentation. Meanwhile, control and measuring devices critical to the safe functioning of nuclear reactors also require our high quality tubes. Within reactor cores, our instrumentation and control tubing encases equipment for monitoring various factors such as pressure, temperature, density differences and fuel burn up rates. It’s an extremely demanding environment where durability and reliability are absolutely critical. Superior Tube supplies instrumentation tubing in straight and coiled tube forms. The most common materials used are special grades of stainless steel and nickel alloys. Superior currently produces instrumentation tubing from up to 1.5” in outside diameter down to less than .020” OD. Please note that we have a minimum order value of £10,000.

HPM® 625 is a nickel-chromium-molybdenum alloy with niobium which is well suited for a wide range of severe corrosive environments. The alloy composition provides a product which performs well at elevated temperatures up to 1800°F. The strength can be increased by cold working. The alloy is readily formed in the annealed temper, and can be joined by the standard welding and brazing processes. Available Sizes: HPM® 625 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.025” (0.0254 mm to 0.635 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM B443, AMS 5599 and UNS N06625.** **Hamilton Precision Metals can also supply product to AMS 5879 (UNS N06626) for demanding fatigue applications, which incorporates double melting, and restrictive limits for Carbon and Nitrogen. Density:0.305 lbs./cu.in. Melting Point (Approx.):1290°C Electrical Resistivity @ R.T.:129 Microhm·cm Temperature Coefficient of Resistivity (20° to 95°C):13.3 x 10-6/ °C Thermal Conductivity @ R.T:13.3 x 10-6/ °C Curie Temperature:< - 196°C